Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

EW99 Heavy Duty Floor and Wall + Activator (Tinted) 4.5L

Product Code: BL048130F
Loading ... Expand image

EW99 Heavy Duty Floor and Wall + Activator (Tinted) 4.5L

Product Code: BL048130F
Trustpilot

A heavy duty coating for floors, walls and structural steel. Resistant to heavy traffic and chemicals

£172.00 Inc VAT £143.33 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
Free next day delivery
£172.00 Inc VAT £143.33 Exc VAT
Bradite EW99 Heavy Duty Floor and Wall is a 2-pack, water-based coating with excellent resistance to heavy traffic and chemicals and is suitable for use on floors, walls and structural steel. 
With a low odour and a coverage of up to 12m²/ per litre. Bradite Heavy Duty Floor and Wall + Activator can be applied by brush, roller or spray.

Touch dry in 1-4 hours and recoatable after 12-24 hours. 

What is a tinted product?
This means the chosen colour and paint finish has been mixed to order, especially for you.

Size
4.5L
Barcode
5050173001101
Coverage
Up to 12sq/m per litre
VOC level
Low
Thinning
Water
Touch dry
1-4 hours
Recoatable
12-24 hours
Suitable for...
Interior use
Scrubbability
Scrubbable
Colour type
Tinted
Finish
Gloss
Cleanup
Water & Detergent
Base
Water
Trustpilot

Data Sheets

Additional Information

Surface Preperation

Substrates should be dust free and completely dry before coating. When painting concrete it is vital to ensure that the substrate is completely dry and free of laitance. Power floated, shiny or unpainted non porous concrete floors should be thoroughly vacuum blast cleaned to a roughness profile of 30-50 microns, or acid etched using Bradite TA37, or primed using Bradite Floor Primer ES40. Please consult the product data sheet for more details.

High pressure water cleaning should be utilised to remove all loose and flaking paint and contamination back to a sound substrate. Bradite TD39 industrial strength detergent should be used if necessary to remove all grease and oil.

Intact areas of existing coatings should be roughened by abrasive manual or disc rubbing and feathered back to a sound coating edge.

Cracks and pits should be filled using a suitable screed or mortar before painting. Substrate should be dust free and completely dry before coating.

Application

  • Thin the first coat on new or uncoated concrete, wood or plaster by 20-30% to enable penetration and binding of substrate.
  • Brush and Roller - Thin, if required with 0-5% water. On smooth substrates, the use of a short pile roller is advised.
  • Conventional Air Spraying - Thin with 10-20% clean water as required, tip size - 2.0mm, tip pressure 60 psi (0.4MPa) approximately.
  • Airless Spraying - Thin with 0-15% clean water as required, tip size - 18 thou (0.46mm) approximately, tip pressure - 2100 psi (15MPa) approximately.

Clean Up

Clean all equipment immediately after use with water.

Related Products