Aqua-Advanced Satin Brilliant White 2.5L
In detail
Bedec Aqua-Advanced Satin is a low VOC content satin finish. A washable product which is thinned with water and is applied by brush, roller or spray is suitable for interior and exterior use.
- Size
- 2.5L
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Coverage
- Up to 15sq/m per litre
- VOC level
- Low
- Thinning
- Water
- Touch dry
- Up to 1 hour
- Recoatable
- 1-4 hours
- Suitable for...
- Interior and exterior use
- Scrubbability
- Washable
- Colour
- Brilliant White
- Colour type
- White
- Finish
- Satin
- Cleanup
- Water & Detergent
- Base
- Water-Based
* Colours on screen may vary from actual paint
Available colours
Bedec Aqua-Advanced Satin Brilliant White is available in 1 colours from the Bedec Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Data sheets
Additional information
Surface Preparation
Ensure the surfaces to be painted are clean dry and free from dust, dirt, grease and wax. Remove all loose and defective paint. Algal and fungal growths should be removed and treated with a fungicidal wash.
Smooth glossy surfaces should be lightly abraded to provide a key.
Application
Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 8°C or when likely to rain before the paint has fully dried.
On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly. Do not over spread.
Clearing Up
Clean up immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.
