Bedec
Block Fill Magnolia (Ready Mixed) 20L

BN0440310C
High build obliterating matt finish for use on internal walls and ceilings.
Block Fill Magnolia (Ready Mixed)
Share...

In detail

Bedec Block Fill is a water-based and low odour product suitable for interior blocks, bricks, masonry and plaster. 

High build quick dry matt finish which is ideally used on concrete wall and ceiling surfaces, designed to fill surface imperfections.

Suitable for interior use.

Size
20L 
Application Methods
Airless Spray, Brush, Roller
Coverage
Up to 10sq/m per litre 
Touch dry
1-4 hours 
Recoatable
4-8 hours 
Suitable for...
Interior use 
Colour
Magnolia 
Colour type
Ready Mixed 
Finish
Matt 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Additional information

BEDEC BLOCKFILL is a water based matt paint suitable for interior use on concrete wall and ceiling surfaces. Designed to fill surface imperfections.

Ensure good ventilation during application and drying. In case of contact with eyes, rinse immediately with plenty of water. After contact with skin, wash off immediately with soap and water or a recognised skin cleanser. Keep out of reach of children. In case of insufficient ventilation during spraying, wear suitable respiratory equipment. Do not store at low temperatures.

Application

  • Ensure surfaces are clean dry and free from crease. salts. defective and poorly adhering material.
  • Apply 2 full coats, preferably with airless spray giving a full even coat, then lay off with a medium pile roller, leaving a minimum of 4 hours between coats.
  • Spray tip size 19thou with a fan of 12 inches.
  • When applying by brush or roller, work into crevices and voids with the first coat.
  • Do not apply at temperatures below 10 centigrade