Blackfriar
Enamel Paint Gloss White 125ML

BN0602701T
FREE next working day delivery available
£7.02 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Oil based, enamel gloss, finish for interior and exterior use.
Enamel Paint Gloss White
  • Enamel Paint Gloss White
Share...

In detail

Blackfriar Enamel Paint is a high VOC content high gloss enamel finish. A washable oil based product that is applied by brush, roller or spray. Suitable for interior and exterior use. 

Gives a tough, durable high sheen finish on wood, metal and plaster providing good resistance to knocking and scuffing. Ideal for garden tools, plaques and models.

Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat.

Size
125ML 
Application Methods
Brush, Roller, Spray
Coverage
Up to 14 sq/m per litre 
VOC level
High 
Thinning
Not Recommended 
Touch dry
4-8 hours 
Recoatable
12-24 hours 
Scrubbability
Washable 
Colour
White 
Colour type
White 
Finish
Gloss 
Cleanup
Brush cleaner or White spirit 
Base
Oil 

* Colours on screen may vary from actual paint

Available colours

Blackfriar Enamel Paint Gloss White is available in 1 colours from the Blackfriar Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Preparation 
    Ensure the surface to be painted is clean, dry, and free from any rust, oils, wax or any other surface contamination. Remove any loose or flaking paint back to a firm edge, abrade any existing coating to provide a key. Rusty metals should be wire-brushed to a clean bright surface and primed immediately with Blackfriar Anti-Rust Primer. Galvanized metal should be degreased and primed with Blackfriar Multi-Surface Primer. New and bare surfaces should be primed with an appropriate primer such as Blackfriar Multi-Surface Primer.

    Application
    Stir thoroughly prior to use. The product may be applied by brush, roller or spray. Two coats are recommended to give best protection.

    Thinning
    Not recommended.

    Limitations
    Do not use under cold (less than 5°C), damp or humid conditions. Blackfriar Enamel Paint is not resistant to petrol or fuel oil (use Blackfriar Quick Drying Metal Paint). Not suitable for direct application to galvanised metal, use Blackfriar Multi-Surface Primer first.

    Coverage
    Up to 14m² per litre per coat.

    Drying Time
    Touch dry in 4-6 hours. Recoat after 12 hours and within 3 days. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times

    Clean Up
    Remove as much product as possible from application equipment before washing with white spirit. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.

    Storage 
    Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight.
    Whilst every effort is made to ensure the accuracy of colour, due to limitations of the print process, colour / finish shown is for guidance only.

    Related products

    Back