Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Quick Drying Radiator Paint Satin White 500ML

Product Code: BN0605605Q
Loading ... Expand image

Quick Drying Radiator Paint Satin White 500ML

Product Code: BN0605605Q
Trustpilot

Tough & durable, non-yellowing, satin finish for interior use. Suitable for oil or water radiators.

£23.99 Inc VAT £19.99 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
Free next day delivery
£23.99 Inc VAT £19.99 Exc VAT
Blackfriars Quick Drying Radiator Paint is a medium VOC content satin finish. A washable product which is thinned with water and is applied by brush. 
Suitable for interior use. it is touch dry in 1 hour and recoatable after 3 hours.
Size
500ML
Barcode
5013296730136
Application Methods
Brush
Coverage
Up to 14sq/m per litre
VOC level
Medium
Thinning
Water
Touch dry
1-4 hours
Recoatable
1-4 hours
Scrubbability
Washable
Colour
White
Colour type
White
Finish
Satin
Cleanup
Water & Detergent
Base
Water
Trustpilot

Data Sheets

Additional Information

Preparation
Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination. Previously painted surfaces in sound condition should be finely abraded and degreased prior to direct application of Blackfriar Quick Drying Radiator Paint. Remove any rust and abrade back to a clean bright surface before priming with Blackfriar Multi-Surface Primer. Coat new or bare areas with Blackfriar Multi-Surface Primer.

Application
Stir thoroughly prior to use with a broad stirrer. The product may be applied by brush, roller or spray. If brushing, use a good quality soft brush, apply with light strokes finishing off in one direction. Leave to dry for one hour then turn the radiator on for one hour. Allow to cool then apply another coat if required following the same procedure. If spraying, the product may be thinned up to 10% with water if needed.

Thinning
Maximum 10% water.

Limitations
Do not use under cold (less than 10°C), damp or humid conditions. Do not apply to warm or hot surfaces. Protect from water or steam for 2-3 days after application. Avoid using harsh cleaning agents on the finish.

Coverage
Up to 14m² per litre per coat.

Drying Time
Touch dry in 1 hour. Heat radiator between coats.

Clean Up
Remove as much product as possible from application equipment before washing with water. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.

Storage
Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight

Related Products