Powerkote Brilliant White Brilliant White 5L
BN360150F
FREE next working day delivery available
Trade customer? - log in to get your prices. close
High adhesion, Pliolite based, matt finish for exterior use. Shower proof in 20 minutes, so can be used all year round.
Share...
In detail
Macpherson Powerkote is a Pliolite based masonry coating for exterior walls and render providing up to 15 years protection.
It has excellent adhesion and is resistant to attack by alkalis, acid and mould growth. Shower proof in 20 minutes and can be applied in temperatures down to -10°C, making it ideal for application throughout the year.
Application is by brush, medium pile roller or airless spray with coverage up to 6.5sq/m per litre. Touch dry in 2-3 hours and recoatable in 16-24 hours. It can be applied over most previously painted surfaces. If the surface is dusty or porous, application of a suitable stabilising primer is required, followed by 2 coats of Powercote.
- Size
- 5L
- Application Methods
- Airless Spray, Brush, Roller
- Coverage
- Up to 6.5sq/m per litre
- VOC level
- High
- Thinning
- Not Recommended
- Touch dry
- 1-4 hours
- Recoatable
- 12-24 hours
- Suitable for...
- Exterior Use
- Scrubbability
- Washable
- Lifespan
- Up to 15 years
- Colour
- Brilliant White
- Colour type
- White
- Finish
- Matt
- Cleanup
- Brush cleaner or White spirit
- Base
- Solvent-Based
* Colours on screen may vary from actual paint
Available colours
Macpherson Powerkote Brilliant White is available in 1 colours from the Macpherson Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Data sheets
Additional information
For Exterior Use
Macpherson Powerkote is a synthetic resin based exterior finish which exhibits exceptional adhesion and durability. Rain resistant in 30 minutes after application, its low temperature tolerance permits almost all year round use. Suitable for the decoration and protection of correctly prepared exterior stucco, cement, stone, precast concrete, pebbledash etc.
Not suitable for common fletton bricks or unprimed granite.
Preparation and Application
- Ensure all surfaces are dry, clean and free from dirt, oil, grease or other contamination.
- Make good all cracks and structural defects.
- Remove any loose or flaking material, previously glossed surfaces must be thoroughly abraded.
- All surfaces must be dry and free from mould, algae, lichen and other organic growths before application. Where organic growth is present treat with a proprietary fungicidal solution.
- Chalky or slightly under bound surface should be primed with a suitable stabilising sealer.
- Avoid Inhalation of dust. Wear a suitable face mask if dry sanding.
- Stir well before use.
- Supplied ready for use by brush, roller or airless spray.
- Covers up to 6m² per litre depending on surface texture and porosity.
- Touch dry in 2-3 hours, recoatable after 24 hours under normal drying conditions.
- Clean equipment with proprietary cleaner immediately after use.
- For further information contact the manufacturer.
Transportation and Storage
Ensure this pack is stored upright and secure at all times. Crown Paints Limited cannot accept liability for damage caused by spillage. Protect this pack from extreme hot and cold temperatures.