Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Hard Hat Topcoat Flat 2178 Black 500ML

Product Code: BN483025Q
Loading ... Expand image

Hard Hat Topcoat Flat 2178 Black 500ML

Product Code: BN483025Q
Trustpilot

Industrial quality topcoats in an aerosol, apply direct to bare steel or over Hard Hat primer.

£21.49 Inc VAT £17.91 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
2 working days
£21.49 Inc VAT £17.91 Exc VAT
Industrial paint aerosols, for bare metal, wood and concrete. The tough flexible film resists chipping, cracking and peeling and is heat-resistant up to 100°C. 

Hard Hat is intended for small maintenance jobs or for touch-up and should be used in light industrial exposures, normal humidity and interior applications. 

To be applied over Hard Hat 2169/2182 primers or properly prepared painted substrates. Touch dry in 15 minutes and recoatable within 1 hour or after 48 hours. 
Size
500ML
Barcode
8715743006111
Coverage
Up to 10sq/m per litre
VOC level
High
Touch dry
Up to 1 hour
Recoatable
Over 24 hours
Colour
2178 Black
Colour type
Ready mixed
Finish
Matt
Age restriction
You must be 16 years or older to buy this product.
Trustpilot

Data Sheets

Additional Information

Surface Preparation

Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. Prime or spot prime with the recommended Rustoleum Primers. Sand intact coatings to provide a proper key for adhesion. The surface must be clean and dry during application.

Application

  • Remove cover cap.
  • Shake vigorously for at least one minute after the rattle of mixing ball is heard.
  • Shake frequently during use.
  • Hold can approx. 25 cm from surface.
  • Use back and forth motion keeping can parallel with surface.
  • Ensure that can is in motion when spray button is pressed to avoid runs and sags.
  • Apply several thin layers at a few minutes interval to achieve adequate coating thickness.
  • After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.

Related Products