Johnstones Trade
Floor Varnish Satin Clear 5L

HA346610F
A hardwearing, solvent-based finish for interior wooden floors. Resists scuffing, washing and chemicals.
Floor Varnish Satin Clear
Share...

In detail

Johnstone's Trade Floor Varnish is a solvent-based hardwearing coating for interior wooden floors. Suitable for moderate traffic areas and is resistant to scuffing, washing and chemicals. 

The transparent finish highlights the woods natural grain and beauty. Application is by brush or spray with coverage up to 17sq/m per litre. Recoatable between 16-24 hours.

Size
5L 
Application Methods
Brush
Coverage
Up to 18sq/m per litre 
VOC level
High 
Thinning
Not Recommended 
Recoatable
12-24 hours 
Suitable for...
Interior use 
Scrubbability
Washable 
Colour
Clear 
Finish
Satin 
Cleanup
Brush cleaner or White spirit 

Additional information

Surface Preparation

Ensure all surfaces to be varnished are sound, clean, dry and free from dust, grease, polish or any other surface contaminant.

Remove any flaking or cracked varnish. Sound, existing varnish should be rubbed down with fine waterproof abrasive paper, rinsed thoroughly and allowed to dry.

Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

Special precaution should be taken during surface preparation of pre 1960s paint surfaces over wood and metal as they may contain harmful lead.

Application

  • Stir thoroughly before use.
  • Apply two or more coats of varnish evenly, by good quality brush along the wood grain as required.
  • Do not overlap the brush strokes.

Clearing Up

Remove as much product as possible from brushes before cleaning.

Clean brushes immediately after use with White Spirit or Turpentine Substitute. Replace lid firmly.

Do not empty product into drains or watercourses.