Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Quick Dry Opaque Wood Finish 2.5L

Product Code: HA347315J
Loading ... Expand image

Quick Dry Opaque Wood Finish 2.5L

Product Code: HA347315J
Trustpilot

A flexible, water-based solid coating for exterior rough sawn timber, fences and cladding.

£54.98 Inc VAT £45.82 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
3 working days
£54.98 Inc VAT £45.82 Exc VAT
Johnstone's Trade Quick Dry Opaque Wood Finish is a water-based flexible coating for smooth planed and rough sawn timber including fences and cladding. Made to cover as a solid satin finish and hide surface defects. 

Microporous coating made to flex and breathe with the wood and has good resistance to blistering and peeling. 

Application is by brush or roller with coverage up to 12sq/m per litre. Recoatable between 4 hours.
Size
2.5L
Barcode
5010426717692
Application Methods
Brush
Coverage
Up to 12sq/m per litre
VOC level
Low
Thinning
Water
Touch dry
1-4 hours
Recoatable
1-4 hours
Scrubbability
Washable
Colour
Ebony
Colour type
Ready Mixed
Finish
Satin
Cleanup
Water & Detergent
Trustpilot

Data Sheets

Additional Information

Surface Preparation

Ensure all timber to be treated is sound, clean, dry and free from dust, grease, polish or any other surface contaminant.

Treat any mould or lichen with a fungicidal wash as directed.

Sand smooth natural planed wood and wipe clean with White Spirit to remove any natural oils or resins and allow to dry.

Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

Special precaution should be taken during surface preparation of pre 1960s paint surfaces over wood and metal as they may contain harmful lead.

Application

  • Stir thoroughly before and during use.
  • Ensure gloves are worn during application to avoid staining of hands.
  • Apply by brush working well into the timber along the grain.
  • Usually one coat will be sufficient, unless on rough or badly cracked timber when two coats should be applied.
  • The final colour achieved will depend on the colour and porosity of the timber and the number of coats applied.
  • Do not apply when temperature is below 10ËšC or when rain is imminent.

Clearing Up

Remove as much product as possible from brushes before cleaning.

Clean brushes immediately after use with warm soapy water and rinse thoroughly. Replace lid firmly.

Do not empty product into drains or watercourses.

Related Products