- Application Methods
- Length (mm)
- Width (mm)
- Height (mm)
Ensure the wood is clean, dry and free from dust. The treatment is most effective if wood is bare. Finishes such as paint, stain and varnish must be completely removed.
- Apply by brush, covering all faces, ends and joints paying particular attention to the end grain, corners, crevices etc.
- Allow 2-3 hours between coats.
- Ensure the wood is fully dry prior to any filling, gluing and knotting is carried out and before laying floor tiles, carpet, underlay or loft insulation.
All tools and equipment should be cleaned immediately after use by washing in water and detergent. Remove as much product as possible from the tools and equipment before washing.