Glass Frosting Varnish Satin 500ML
HC4117Q
Trade customer? - log in to get your prices. close
Easy to apply, low odour, quick drying. For interior use on most glasses and plastics.
Share...
In detail
Easy to apply, low odour, quick drying. For interior use on most glasses and plastics giving the effect of frosted glass. Can also be used with stencils.
Ideal for windows, mirrors, shower screens and decorative effects.
Dry after 2-4 hours at room temperature.
- Size
- 500ML
- Application Methods
- Brush
- Coverage
- Up to 8sq/m per litre
- VOC level
- Low
- Thinning
- Do not thin
- Touch dry
- 1-4 hours
- Recoatable
- 1-4 hours
- Scrubbability
- Wipeable
- Finish
- Satin
- Cleanup
- Water & Detergent
Data sheets
Health and Safety Data Sheet
The Health and safety data sheet for Glass Frosting Varnish Satin 500MLAdditional information
Surface Preparation
Ensure that the glass is perfectly clean and free from grease and is not cold, since any condensation or moisture will spoil the result.
Application
- Apply a cut stencil pattern with Polyvine Stencil Tack, or cover the glass with masking tape and cut out a design of your own, peeling away the cut out.
- Brush a light coat of Frosting Varnish evenly onto the glass and produce the texture using a small dry sponge roller.
- Carefully remove the stencil or masking tape before the varnish dries.
- When cleaning the glass, use warm soapy water - do NOT use solvent-based window cleaning agents.
- Can be tinted with Polyvine Colourisers.
Clean Up
Any equipment used can be cleaned using soap and water before the clear coat dries. Wipe any excess off surfaces with a damp cloth. Any dried deposits will need a paint stripper to remove them.
