DP9 Floor-It Dark Grey (Ready Mixed) 5L

Store stocked line
FREE next working day delivery available
£111.50 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Ideal for garages, workshops, kitchens, bathrooms, staircases and light industrial traffic.
DP9 Floor-It Dark Grey (Ready Mixed)

In detail

Bradite Floor-It is a high performance floor coating which is formulated for use in light to medium traffic areas. Low odour acrylic floor paint which is ideal for use on factory walkways and general shopfloor, suitable for use on internal and external surfaces such as: wood, concrete, metal or asphalt surfaces as well as polyurethane, epoxy and chlorinate rubber coated floors.

Extremely durable product with excellent adhesion which is mark, stain and petrol resistant. Non-yellowing, quick drying floor coating that offers minimal disruption due to the floors being ready for light use in 16 hours. Touch dry in 30 minutes and re-coatable after 1 hour.

Application Methods
Brush, Roller, Spray
Up to 12sq/m per litre 
Touch dry
Up to 1 hour 
1-4 hours 
Suitable for...
Interior and Exterior use 
Dark Grey 
Colour type
Ready Mixed 
Water & Detergent 

* Colours on screen may vary from actual paint

Additional information

DP9 is a high performance ambient cross-linking water based acrylic floor paint, Suitable for use over interior/exterior bare or previously painted suitable prepared concrete, wood, steel, tarmac asphalt floors requiring an economical, hard wearing, flexible coating with good chemical and excellent water resistance.


Substrates should be dust free and completely dry before coating. When painting concrete it is vital to ensure that the substrate is completely dry and free of laitance. Powder coated, shiny or unpainted non porous concrete floors should be thoroughly vacuum blast cleaned to a roughness of 30-50 microns, or acid ethced using Bradite TA37, or primed using Bradite Floor Primer ES40. Please consult the product data sheet for more details.

High pressure water cleaning should be utilised to remove all loose and flaking paint and contamination back to a sound substrate. Bradite TD39 industrial strength detergent should be used if necessary to remove all grease and oil.

Intact areas of existing coatings should be roughened by abrasive manual or disc rubbing and feathered back to a sound coating edge. Cracks and pits should be filled using a suitable screed or mortar before painting.


  • Brush and Roller - supplied ready for use. Thin with 0-5% water if required.
  • Conventional Air Spraying - Thin with 5-15% water as required, +tip size - 2.0mm, tip pressure 60psi (0.4MPa) approximtely
  • Airless Spraying - Thin with 0-10% water as required, tip size - 18 thou (0.46mm) approximately, tip pressure - 2100psi (15MPa_ approximately.