Blackfriar
Chalkboard Paint Black (Ready Mixed) 2.5L

BN060181J
£46.46 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

For an easy to write & clean surface, matt finish for interior use. Ideal for creating new or renovating old chalkboards
Chalkboard Paint Black (Ready Mixed)
Share...

In detail

Blackfriars Chalkboard Paint is a high VOC content matt finish. A wipeable product applied by brush. 

Suitable for interior use. With a coverage of up to 14sq/m per litre this Chalkboard paint is touch dry in 16 hours and recoatable after 16-24 hours.

Size
2.5L 
Application Methods
Brush
Coverage
Up to 14sq/m per litre 
VOC level
High 
Thinning
Not Recommended 
Touch dry
12-24 hours 
Recoatable
12-24 hours 
Scrubbability
Wipeable 
Colour
Black 
Colour type
Ready mixed 
Finish
Matt 
Cleanup
Brush cleaner or White spirit 
Base
Oil 

* Colours on screen may vary from actual paint

Additional information

Preparation 
Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination. Previously painted surfaces in sound condition should be abraded and degreased prior to direct application of Blackfriar Chalkboard Paint. Remove any rust and abrade back to a clean bright surface before priming with the appropriate Blackfriar Metal Primer. New or other bare surfaces should be primed with the appropriate Blackfriar primer.

Application
Stir thoroughly prior to use with a broad stirrer. The product may be applied by brush, roller or spray. Two coats are recommended to give best protection.

Thinning
Not recommended.

Limitations 
Do not use under cold (less than 5°C), damp or humid conditions. Not suitable for use on roller boards or with liquid chalks. There may be some 'ghosting' when the chalkboard is first used. To overcome this, clean the board with a damp rag. If used externally regular maintenance will be required. Not suitable for direct application to galvanised metal, use Blackfriar Multi Surface Primer first.

Coverage
Up to 14m² per litre per coat.

Drying Time
Hard dry in 16 hours. Recoat after 16 hours and within 3 days. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.

Clean Up
Remove as much product as possible from application equipment before washing with white spirit. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.

Storage
Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight.
Whilst every effort is made to ensure the accuracy of colour, due to limitations of the print process, colour / finish shown is for guidance only.