Problem Solver - Creosote
Problem
Tar Based product often used for fencing or as a wood preservative
Stages
Stage 1 - Preparation
Clean/Wash down surface
If any mould or mildew is apparent, treat with a suitable fungicidal solution, rinse again with clean water and allow to dry.
Brewers recommends:
-
Albany Fungicidal Wash 1L
- A 1 litre concentrated multi surface treatment to prevent the growth of surface mould on timber and masonry
Depending on surface substrate check condition and carry out any remedial works required to make sound
Stage 2 - Basecoat
Apply suitable stain blocking primer. Alloy to dry and apply a 2nd coat in the same way.
Brewers recommends:
-
Albany Aluminium Wood Primer Grey (Ready Mixed) 2.5L
- Excellent adhesion, for interior and exterior use. Specially for hardwoods and resinous softwoods.
Stage 3 - Topcoat
Apply your choice of topcoat to manufacturers recommendations and allow to dry – 2 coats.