Problem Solver - Grease
Vegetable oil, animal fats hand prints, etc
Stage 1 - Preparation
Clean & wash down surface
If any mould or mildew is apparent, treat with a suitable fungicidal solution, rinse again with clean water and allow to dry.
Albany Fungicidal Wash 1L
- A 1 litre concentrated multi surface treatment to prevent the growth of surface mould on timber and masonry
Depending on surface substrate check condition and carry out any remedial works required to make sound
Stage 2 - Basecoat
Apply suitable stain blocking primer. Alloy to dry and apply a 2nd coat in the same way.
Zinsser Bulls Eye 123 White 1L
- Fast drying, excellent adhesion, for interior and exterior use
Stage 3 - Topcoat
Apply your choice of topcoat to manufacturers recommendations and allow to dry – 2 coats.