Problem Solver - Metal surfaces
Problem
Can be ferrous, non ferrous or a mixture called an alloy decoration will vary according to type, and some may not be coatable
Stages
Stage 1 - Preparation
Wash surface down with detergent or sugar soap
Abrade with 100 grit abrasive paper to remove any loose or flaking areas and to create a key
Stage 2 - Basecoat
Once the surface is clean and all loose material has been removed, treat with as suitable primer and allow to dry.
Apply a suitable undercoat
Stage 3 - Topcoat
Apply a suitable topcoat
Problem
Can be ferrous, non ferrous or a mixture called an alloy decoration will vary according to type, and some may not be coatable
Stages
Stage 1 - Preparation
Wash surface down with detergent or sugar soap
Abrade with 100 grit abrasive paper to remove any loose or flaking areas and to create a key
Stage 2 - Basecoat
Once the surface is clean and all loose material has been removed, treat with as suitable primer and allow to dry.
Apply a suitable undercoat
Stage 3 - Topcoat
Apply a suitable topcoat