Problem Solver - Drywall
Drywall (also known as plasterboard, wallboard, gypsum board) is a panel made of gypsum plaster pressed between two thick sheets of paper. It is used to make interior walls and ceilings. Drywall construction became prevalent as a speedier alternative to traditional lath and plaster.
Stage 1 - Preparation
Ensure surface is sound dry and clean
Sand the surface using 70 grit abrasive paper
Flexovit Glasspaper Sheet Grade M2
- M2 - medium hand sanding sheets, ideal for general purpose applications.
Make good any defective areas to match existing
Brewers Interior Filler 2KG
- Brewers Interior Filler is specifically made for inside use, giving a tough, permanent finish.
Stage 2 - Basecoat
Once the surface is clean and all loose material has been removed, treat with a suitable primer and allow to dry.
Brewers Tack Cloth Single
- Used for wiping over a surface before decorating to remove dust.
Stage 3 - Topcoat
Apply your choice of topcoat to manufacturers recommendations and allow to dry – 2 coats.
Albany Supercover White 5L
- Fast drying, high opacity, matt finish for interior use on walls and ceilings