Problem Solver - New Plaster

Problem

A soft mixture of sand and cement and sometimes lime with water, for spreading on walls, ceilings, or other structures, to form a smooth hard surface when dried.


Stages

Stage 1 - Preparation

Ensure surface is sound dry and clean


Sand the surface using 70 grit abrasive paper

Brewers recommends:

Make good any defective areas to match existing

Brewers recommends:

Sand the surface using a fine wet and dry paper.

Brewers recommends:

Stage 2 - Basecoat

Once the surface is clean and all loose material has been removed, apply a mist coat and allow to dry.

Brewers recommends:

Stage 3 - Topcoat

Apply your choice of topcoat to manufacturers recommendations and allow to dry – 2 coats.

Brewers recommends: