Problem Solver - Limestone
A hard sedimentary rock, composed mainly of calcium carbonate or dolomite, used as building material and in the making of cement.
Stage 1 - Preparation
Dry brush the surface down using a stiff bristle brush to remove any loose materials
Prep Bassine Masonry Brush 4"
- A bassine hand brush for cleaning down exterior masonry surfaces prior to finishing.
If any mould or mildew is apparent, treat with a suitable fungicidal solution, rinse again with clean water and allow to dry.
Albany Fungicidal Wash 1L
- A 1 litre concentrated multi surface treatment to prevent the growth of surface mould on timber and masonry
Depending on surface substrate check condition and carry out any remedial works required to make sound
Brewers Interior Filler 500G
- Brewers Interior Filler is specifically made for inside use, giving a tough, permanent finish.
Stage 2 - Basecoat
Once the surface is clean and all loose material has been removed, treat with a suitable primer and allow to dry.
Albany Stabilising Solution Clear 2.5L
- A penetrating sealer for masonry surfaces, in one coat
Stage 3 - Topcoat
Apply an appropriate topcoat and allow to dry, followed by a 2nd coat to finish.