Problem Solver - Concrete
Concrete is a composite material composed of aggregate bonded together with a fluid cement which hardens over time.
Stage 1 - Preparation
Dry brush the surface down using a stiff bristle brush to remove any loose materials
Prep Bassine Masonry Brush 4"
- A bassine hand brush for cleaning down exterior masonry surfaces prior to finishing.
If any mould or mildew is apparent, treat with a suitable fungicidal solution, rinse again with clean water and allow to dry.
Albany Fungicidal Wash 1L
- A 1 litre concentrated multi surface treatment to prevent the growth of surface mould on timber and masonry
Depending on surface substrate check condition and carry out any remedial works required to make sound
Brewers Exterior Filler 2KG
- Sets 5 times harder than concrete within 1 hour.
Stage 2 - Basecoat
Once the surface is clean and all loose material has been removed, treat with a suitable primer and allow to dry.
Albany Stabilising Solution Clear 2.5L
- A penetrating sealer for masonry surfaces, in one coat
Stage 3 - Topcoat
Apply an appropriate topcoat and allow to dry, followed by a 2nd coat to finish.